Sunday, February 21, 2016

saudi turf team Acrylic Rubber Floor Tiles

saudi turf team Acrylic Rubber Floor Tiles 


Are you trying to decide what to do with your stained, ugly garage floor ? Sure, you can add some sort of garage rubber floor, and they work really well, but they do require a lot of prep work if you want a job that will last. Both epoxy and acrylic rubber floor paints need a concrete surface that is absolutely free of any dirt, grime, and oil stains. If you don't do this prep work you will be unhappy with the results.

Another option that gives you a great looking and functioning floor in your garage is rubber floor tiles. There are really two types to think about. The first is a rubberized tile that is stuck to the underlying concrete surface with an adhesive. These do work well but you have the same problem with prep work. You can easily spend the entire weekend scrubbing and degreasing the concrete in your garage so the rubber tiles will stick down. Like the paints, if the floor is not absolutely spotless the glue on the tiles will not stick and they will lift up.

The second option is to install garage rubbber mats that interlock. These tiles fit together like a jigsaw puzzle and actually "float' on the concrete floor surface. Although you do want to clean up any dirt from the floor before laying out these rubber tiles you don't need to worry about oil stains and grease spots. With this system the tiles are not applied with an adhesive so you don't need to worry about whether they stick down or not.

Interlocking rubber floor tiles are very durable and can stand up to normal garage traffic including driving your car in and out several times a day. The tiles actually have lips which means you don't need to worry about any spilled liquids getting youre acrylic rubber surface underneath and causing problems. The lips on the edges of the tiles keep the liquids on top for easy cleanup. Speaking of cleanup, the tiles will not stain so most of the time you can just spray them off or if they get oil spilled on them you can clean it up with detergent and water along with a little elbow grease.

The only really downside to acrylic rubber tiles in saudi arabia is the heat factor. This is not really an issue unless you want to use a torch to cut metal, or an arc welder, as the sparks can burn a hole in the tiles. This is easily remedied though by laying out a thin sheet of metal under your welding bench.

No comments :

Post a Comment