saudi turf team Acrylic rubber Stain
You have many options when contemplating acrylic rubber coating for your concrete surface whether it is inside our out. Acrylic rubber stain is one of the best for several reasons which we will discuss further. If you are looking for an easy do it yourself project that will really make a difference around your home then applying an acrylic rubber floor should definitely be something you should check out.
There has always been an argument about whether a acrylic rubber surface in the home should be acrylic based or epoxy based. Epoxies are very popular because of their use in industrial shops as a rubber floor protection system but they have definite draw backs. The most important being that UV rays, those that come from the Sun, can degrade epoxies and cause them to fail. Also, they are prone to "hot tire lift" which means a hot tire can actually lift off the epoxy if it is not cured properly. This is not the case with acrylic rubber has they are not susceptible to UV radiation, heat from vehicle tires, mildew, or acid. Currently, acrylics rubber halls coatings in saudi arabia are being used successfully in basements, garages, outdoor walk ways, patios, and even driveways.
The first step to applying a rubbber floor covering of any type involves preparing the underlying floor surface. Of course you need to be sure that all dirt, mildew, and rust are removed. As these will cause the product to not bond properly. If you are working in your garage or driveway then you also need to be aware of any oil or grease spots. Petroleum stains are notorious for causing early failure of floor systems. If you have any stains at all then the first step should be to use a good degreaser to remove them. This requires some muscle work as you will usually have to scrub the rubber surface once the degreaser is applied but it will be well worth the effort.
No comments :
Post a Comment